TS2-CLIENT & SERVER

9 KENNISBANK

TeamSpeak2 Client & Server

Deze twee -al wat oudere applicaties gebruiken wij niet meer voor het communiceren via diverse kanalen tijdens vluchten met ATC-ondersteuning.

Wij zijn overgestapt op FSE Discord UNICOM

Artikelen BIJ TeamSpeak2

  1. TS2-CLIENT & SERVER

Contents of this article

How to Download TS2 Server and TS2 Client files

(1) Download TeamSpeak2 Server and client files via our DOWNLOAD page
(2) You will see 2 executables: ts2-server and ts2-client.
(3) There are also 2 latest modified executables:
(4) 1 exe for the server (server_windows) as well as
(5) 1 exe for the client (TeamSpeak).
Download both 4 files. (If not found, call HELPDESK)


Go Top

How to install the TeamSpeak2 Server app

Wait for the Welcome screen:
Unpack in the download folder the file named: ts2_server_rc2_20201.exe 
Install this program ts2_server_rc2_20201.exe using the Run as Administrator command.

Accept the License agreement

Select a destination directory: e.g.

When you did already install TeamSpeak Client, you get the message:

Select Start Menu Folder:

Select Additional Tasks like a shortcut on your desktop: 

Then it says: Ready to install…

Getting the Information screen:

Completed! Click Finish and Launch the server.

Accept Firewall Settings

Now take care, because after the opening logo, you once get the opportunity to write down the passwords for admin and super admin of this server! Write down the passwords!
If you forget to do this… you can find the passwords in the server log file.

Close this screen…ready to go!
REMINDER:
If your server is installed behind a NAT router, please configure the router settings and forward port 8767 UDP in your router.

  • Now launch TS2Server with the shortcut on your desktop…and
  • observe with a right mouse popup in your system tray on the TS2 icon:
  • the 3 icons (that’s where the clock is…)
  • Administration…IP addresses…Exit
  • Select Administration,
  • Change the settings as you wish.
  • Use the help function.
  • Before to continue, close the server with Exit.

Go Top

How to replace the server executable file

  • Go to the installation folder of the server app.
  • Rename the file server_windows.exe to server_windows_old.exe
  • Copy/ paste the previous downloaded file into this place.

Go Top

 How to install TS2 Client app

  • The TeamSpeak2 Client application is installed together with IvAp v2 or Altitude/Aurora

Go Top

How to replace the client executable file

  • In your local TS2 folder: TeamSpeak2 version 2.0.32.60 is subject to possible infringement on the Internet. To avoid this it is recommended that you replace the executable file. What to do?
  • Go into the installation folder of TeamSpeak2_RC, this is mostly C: Program Files (x86)/Teamspeak2_RC2/ or your chosen installation path
  • Rename TeamSpeak.exe with the old version as 2.0.32.60 TeamSpeak.exe
  • Place the new updated executable (version 33.7) . Exe in the folder C: Program Files (x86)/Teamspeak2_RC2/
  • The new file TeamSpeak.exe (version 33.7) is on our Download page ;  this update is a new .exe file and is NOT an installer.

Go Top

How to create Channels and Sub Channels

How to Create New Channel

Start your TeamSpeak2 Client on the PC where the client is running;

  • Login as Registered User with the earlier given Login name  (admin) and password.
  • The Default Channel (RD) appears;
  • Now to create a Channel:
    • Select Channels  >>
    • Create Channel >>
  • Fill a frequency in the field Name:
    (e.g. 121.750)
  • Give it a name in the field Topic: EBBR ATIS
  • Password: leave this field empty
  • Select a Codec: Speex 12.3 Kbit ./. 25.9 KBit
  • Set the Flags: check the box”Registered” only
  • Press button “Create channel”118

Ready to go!

Remind that the Com frequencies only work with the Com1 radio!

Go Top

How to activate TeamSpeak with the Yoke

  • Start the simulator and open FSUIPC5 – tab Buttons + Switches
  • Press any button on your yoke or joystick (E.g. Joy# 2 en Btn# 0)
  • Check the box Select for key press
  • Press the key(s) to be sent when you press this button
  • Press e.g. CapsLock
  • Check Key press to repeat while held and close with OK
  • Start TeamSpeak2 as ADMINISTRATOR (!)
  • Go to Settings >> Sound Input/Output (see picture)
  • Press Set and the key as in step 5, then close with Close
  • When TeamSpeak2 is not started by default as Administrator , go to the  installation path of TeamSpeak2.
  • Place right mouse on the file TeamSpeak.exe and choose Properties.
  • Select tab Compatibility and check the box Run this programma as Administrator
  • Select Apply and  OK….Ready!

Note: when TeamSpeak2 is not launched as administrator, you must activate the TS2 window to speak.

Go Top

Text for registered channels

Common Phraseology

Channel:
1_DELIVERY

Topic:


User in channel:
0/16

Codec:
Speex 25.9 Kbit

Description:
Pilot:	[airport  name] delivery, [call sign], information [__] requests IFR clearance to [airport name]

ATC1: 	[call sign] cleared to [airport name] via the [sid] departure, runway:_____ Squawk______ QNH____

Pilot: 	[read back]

ATC2: 	[call sign], read back correct, (call when ready)

Pilot: 	[call sign] ready for start-up

ATC3: 	[call sign] contact ground [frequency]

Channel:
2_GROUND

Topic:


User in channel:
0/16

Codec:
Speex 25.9 Kbit

Description:
Pilot:	[airport name] Ground, [call sign] good day), at (gate/parking) _____ ready for Push and Start

ATC4:	[call sign] push and start approved (facing N/S/W/E)

Pilot: 	[call sign] ready for Taxi

ATC5: 	[call sign] taxi via [taxi route] to (holdingpoint) (RWY)_____

Pilot: 	[call sign] at (holdingpoint ) (RWY) __

ATC6: 	[call sign] contact Tower on [frequency]

Pilot:	([red back](bye)(thanks), [call sign]

Channel:
3_TOWER

Topic:


User in channel:
0/16

Codec:
Speex 25.9 Kbit

Description:
Pilot:	[airport name] Tower, [call sign], at holdingpoint) (RWY) _____ 

ATC7:	[call sign], line-up Rwy [__]{or} Line-up Rwy [___] behind the traffic behind

Pilot: 	[call sign], ready for departure

ATC8:	[call sign], cleared for take-off RWY[__]Wind[___/___kts)(QNH [____], (Initial climb[____](feet)

Pilot: 	[call sign], leveled at [____]feet)

ATC9:	[call sign], Contact Radar on (freq) 118,300 (at [____] ft)

Pilot: 	[read back](bye)(thanks), [call sign]

Channel:
4_CTR_RADAR_UNICOM

Topic:


User in channel:
1

Codec:
Speex 25.9 Kbit

Description:
Pilot: 	[airport] Radar, [call sign], with you, (FL[____]/ climbing to FL[____]

ATC10:	[call sign], radar contact/identified, Climb FL[____], {or} (Fly direct ______)

ATC11:	[call sign], You are leaving my airspace, Contact Radar/Control/Approach (on) [frequency]
		{or} Switch [UNICOM]

Pilot: 	Switching [airport name] Approach on [frequency]

Channel:
5_APPROACH

Topic:


User in channel:
0/16

Codec:
Speex 25.9 Kbit

Description:
Pilot: 	[airport name] Approach, [callsign] approaching [begin STAR] descending FL___ 

ATC12: 	[call sign], identified, Information [__](is current); 
		{and/or) (Turn right/left hdg _____ ),
		(descend {or} maintain to FL/ft _____ 
		{and/or} (to be levelled at __________ )(QNH ______ )

ATC13:	[call sign], expect the [named STAR] Arrival Rwy [__]

ATC14:	[call sign], descent to [____]; QNH [____] 

ATC15:	[call sign], cleared for ILS-/LOC/Visual -approach Rwy [__]

Pilot: 	[call sign], established ILS/LOC wy [__]{or} Rwy [__] in sight

ATC16	[call sign], contact [airport name] Tower, on [frequency]

Channel:
6_TOWER

Topic:


User in channel:
0/16

Codec:
Speex 25.9 Kbit

Description:
Pilot: 	airport name] Tower, [call sign], (good day ), established ILS Rwy [__]/Rwy [__]in sight

ATC17:	[call sign], continue approach you are number ______ 

ATC18:	[call sign], cleared to land Rwy ______ Wind ______ (dgr) ______ (kts), QNH ______ 

Pilot: 	[call sign] Vacated the runway ( on exit ______ )

ATC19:	[call sign], contact Ground on [frequency]

Pilot: 	Contact Ground (on)______.__ (bye)(thanks), [call sign]

Channel:
7_GROUND

Topic:


User in channel:
0/16

Codec:
Speex 25.9 Kbit

Description:
Pilot: 	[airport name] Ground,[call sign] (good day), Rwy __vacated ( on exit __)

ATC20:	[call sign], taxi via [taxi route] to gate/parking/stand [parking lot]

Pilot: 	[call sign], On the blocks

ATC21:	[call sign], Welcome to [airport name], switch off approved

Pilot: 	Switch off approved, Thanks, good bye, [call sign]

Go Top